| 产品特性 | ||
| 医疗和ITE安全认证 | ||
| 2 MOPP 隔离保护 | ||
| 漏电流 ≤ 100μA | ||
| DOE 六级能效 | ||
| 待机功耗≤0.15W | ||
| 12V至52V输出, 最高90W | ||
| 工作海拨高度5000米 | ||
| 输入有4种AC插座形式 | ||
| 涵盖短路保护、过压保护、过载保护; | ||
| 电气规格 | ||
| 输入电压:90~264VAC | ||
| 输入电流:1.5A | ||
| 待机功率:0.15W | ||
| 输出电压范围:±5% | ||
| 环境参数 | ||
| 工作温度: 0~40℃ | ||
| 储存温度: -20~80℃ | ||
| 工作湿度:10~90% | ||
| 储存湿度:5~90% | ||
| 安规认证 | ||
| 安全机构/标志 | 医疗 | 通信 |
| CB | IEC60601-1 | IEC60950-1 IEC62368-1 |
| UL | ANSI/AAMI ES60601-1 | UL60950-1 UL62368-1 |
| CAN/CSA C22.2 NO.60601-1 | ||
| TUV Rheinland/Mark | EN60601-1 | - |
| TUV Rheinland/GS | EN60950-1 EN62368-1 | |
| CE | EN62368 | |
| CCC | GB4943.1 | |
| FCC | FCC PART 15 | |
| PSE | J60950 | |
| 机械规格 | ||
| 146(长)*59.5(宽)*36(高)mm | ||
| 应用场所 | ||
| 适用于医疗、信息通讯设备类电源适配器 | ||
| 输出数据 | | |||||||
| 型号 | 电压 | 电流 | 额定功率 | 纹波 | 电压公差 | 线性与负数调整率 | 平均效率 | 启动延迟时间 |
|
| 12.0 | 0.01-7.00 | 84.00W | 150 | ±5% |
| 88.60% | ≤3s |
|
| 12.1-15.0 | 0.01-5.67 | 85.05W | 180 | ±5% |
| 88.60% | ≤3s |
|
| 15.1-17.0 | 0.01-5.00 | 85.00W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 17.1-19.0 | 0.01-4.76 | 90.44W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 19.1-22.0 | 0.01-4.10 | 90.20W | 200 | ±5% |
| 88.60% | ≤3s |
| UES90-XXXYYYSPAZ | 22.1-24.0 | 0.01-3.75 | 90.00W | 200 | ±5% | 线性调整率: ±1% | 88.60% | ≤3s |
| UES90-XXXYYYSPA -OP | 24.1-26.0 | 0.01-3.34 | 90.09W | 200 | ±5% | 负载调整率: ±5% | 88.60% | ≤3s |
|
| 26.1-30.0 | 0.01-3.00 | 90.00W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 30.1-33.0 | 0.01-2.73 | 90.09W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 33.1-36.0 | 0.01-2.50 | 90.00W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 36.1-39.0 | 0.01-2.31 | 90.90W | 200 | ±5% |
| 88.60% | ≤3s |
|
| 39.1-43.0 | 0.01-2.10 | 90.30W | 240 | ±5% |
| 88.60% | ≤3s |
|
| 43.1-46.0 | 0.01-1.96 | 90.16W | 360 | ±5% |
| 88.60% | ≤3s |
|
| 46.1-48.0 | 0.01-1.88 | 90.24W | 480 | ±5% |
| 88.60% | ≤3s |
| | 48.1-52.0 | 0.01-1.73 | 89.63W | 560 | ±5% | | 88.60% | ≤3s |